Other Projects

Owner-retained mechanical certification verifying full code compliance, water testing, grease duct inspections, and HVAC performance in a luxury resort setting.

Full tenant buildout including as-built analysis, code compliance, lighting/power, kitchen design, plumbing, and air-side HVAC.

5,400 sqft medical clinic tenant buildout with as-built analysis, code compliance, lighting/power, plumbing, and air-side HVAC systems.

5,000 sqft Japanese kitchen design including water systems, hoods, air conditioning, makeup air, sewer, and EPA grease interceptor.

Design and construction administration for 150-ton chiller and LPG hot water boiler replacement.

LEED Silver 45,000 sqft bank and office building with advanced HVAC, plumbing, and fire protection systems.

Remodel for expanded capacity including EOR for HVAC, ovens, water filtration, kitchen, and storage facilities.

3,290 sqft restaurant buildout with kitchen hoods/equipment layout, plumbing (sanitary, grease trap, domestic water), VRF aircon, exhaust, and makeup systems.

2,000 sqft restaurant tenant buildout including as-built analysis, code compliance, lighting/power, kitchen design, plumbing, and air-side HVAC.

Owner representative for 1.5MW facility with backup power; SME plan review, code compliance, weekly reporting, and construction QC.

Design of 190-ton chiller pump system replacement.

Three-story medical facility; EOR for 2nd-floor tenant buildout and primary chiller service with medical-quality air conditioning, water, and drain systems.

Two-story office space; EOR for plumbing and HVAC systems including site inspection and tenant buildout.

Three-story office building with VRF HVAC systems, plumbing, and construction administration.

New two-story apartment complex water supply system including GWA connection, storage, pumps, tanks, controls, foundation, and enclosure.

EOR for remodel of AC and plumbing systems.

Remodel of AC and plumbing systems.

Addition of new kitchen hoods.

Mechanical engineering for renovation including offices, bar, restaurant, lobby, rooms, spa, beach bar, and chapel.

QC specialist for mechanical and plumbing systems.

EOR for AC and plumbing design.

EOR for remodel of AC and plumbing systems (historical building).

Fiber optic system connecting various facilities to primary server room.

EOR for AC and plumbing in luxury five-unit facility with solar hot water system.

Remodel of AC and plumbing systems.

OR for AC and plumbing design.

EOR for AC and plumbing design.

EOR for AC and plumbing design.

Three-story office and two-story bank; EOR for AC and plumbing design.

EOR for AC and plumbing design.

EOR for AC, kitchen, and plumbing design.

AC and plumbing remodel design.

3,200 sqft high-end two-story residence with VRF aircon design and construction inspection.

Residential design-build including private sewage lift station.

DOR for kitchen hood and fire upgrades per inspection report.

Tenant remodel of bar into restaurant with new kitchen, restrooms, seating, mechanical, plumbing, electrical, and FF&E layout.

Tenant improvement with kitchen FFE, electrical, mechanical, and architectural layout.

Mechanical DOR for remodel including AC and restrooms for new tenant requirements.

Tenant improvements to Pacific Place space including architectural, kitchen, electrical, plumbing, and HVAC with hoods.

As-built, fire code review for sprinklers/alarms, and fire protection consulting.

Structural, electrical, and mechanical analysis for two 350-ton air-cooled chillers installation.

6,200 sqft office/shop project management, QC, coordination, and mechanical air-side redesign for cost savings.

HVAC, plumbing, and fire protection design for submarine cable office and server building.

DOR for affordable rainwater harvesting system for potable water on outlying islands.

DOR for sandblast booth replacement including fans, cyclones, ducting, compressors, and electrical.

Septic and water separation plans.

Coordination drawings and redesign of civil main water line.

Lift station for building site expansion with GWA tie-in.

Mechanical services for generator seismic bolting, conduit/cable tray supports, and structural analysis.

New protective building, above-ground tanks, loading arm, pumps, dispensers, and filling station.

EOR mechanical design and retrofit with new pumps and additive metering for diesel/jet fuel.